F A Morris

F. A. Morris Ltd is a Sheffield based company which, since its formation more than 45 years ago, has established a reputation for high quality precision engineering. All work undertaken is carried out to BS EN ISO 9002 Quality Standards accredited to the company in 1990.

Note: New customers should be aware that a discount structure applies based upon quantities ordered. Please contact us for details.

	No 0 size UK £	No 1 size UK £	No 2 size UK £
Holders Complete	18.94	24.31	34.83	each
Holders (Handle Only)	-	-	14.75	each
Spindles	5.25	10.97	15.75	per 10
Side Bushes	7.25	-	-	per 10
Cutter Bushes	-	7.56	10.75	per 10
Side Washers	-	7.25	7.50	per 10
Angle Type Holder	20.22 Net

	No 0 size UK £	No 1 size UK £	No 2 size UK £
Holders Complete	-	-	54.34	each
Spindles	5.05	5.05	5.10	per 10
Cutter Bushes	-	5.80	8.95	per 10
Side Nuts	35.03	34.08	41.46	per 10

Suitable for use with both Huntington and Hexagon pattern holders.

	UK £
No 0 (Standard)	18.93	per 10 sets
No 0 (5's)	21.68	per 10 sets
No 1	20.88	per 10 sets
No 2	49.98	per 10 sets
No 2 (Thick)	58.36	per 10 sets
No 2 (Singles)	0.34	each
Gardner (RO3)	7.46	per set
FG Junior (RO4)	11.85	per set
Paragon (RO5)	0.34	per set

	No 0 size UK £	No 1 size UK £	No 2 size UK £
Huntington	4.63	6.34	10.98	each Net
Hexagon	10.42	11.36	18.35	each Net
Huntington Ear Pieces	0.23	-	-	each Net

	UK £
1" Conical	1.28	each
2" Conical	1.28	each
3" Conical	1.28	each
4" Conical	2.00	each
2 3/4" Semi-Conical	1.28	each
3" Semi-Conical	1.28	each
4" Semi-Conical	2.00	each

		UK £
Special Cutters	BFO1	0.20	each
	VBO1	0.65	each
	PERO1	19.68	each
Concrete/Scariffier Cutters	CC012	0.36	each
	CC013	0.44	each
	CC014	0.14	each
	CC090	0.19	each
	CC094	0.33	each

Special Cutters to customers specifications available on request.

These products are only to be used in conjunction with our recommended Dressing Equipment. Only persons trained in the use of dressing grinding wheels should use this product. Safety Glasses/Goggles must be worn at all times.

E & O E